PNA Series Microwave Network Analyzers
E8362C, E8363C, E836C
Section Title
Option H11, IF Access,
Operation Verification
Performance Tests (Agilent
N7840A Software
a
Package)
Adjustments
a. The Agilent N7840A software package must be purchased separately.
Service Guide E8364-90038
Summary of Content
How to verify the operation of Option H11, IF access.
A brief summary of each performance test in the Agilent N7840A
software package:
•
Source Power Accuracy Test
•
Source Power Linearity Test
•
Frequency Accuracy Test
•
Trace Noise Test
•
Receiver Compression Test
•
Noise Floor Test
•
Calibration Coefficient Test
•
System Crosstalk Test
•
Dynamic Accuracy Test
Setups and procedures for adjusting your analyzer:
•
Source Calibration Adjustment
•
Receiver Calibration Adjustment
•
LO Power Adjustment
•
10 MHz Frequency Reference Adjustment
•
3.8 GHz PMYO Frequency Adjustment
Tests and Adjustments
Information in This Chapter
Start Page
Page 3-29
Page 3-30
Page 3-38
3-3