Msi/Plessey Fixed Length 2 - Datalogic MAGELLAN 8200 Product Reference Manual

MSI/Plessey Fixed Length 2

NOTE
Product Reference Guide
This feature specifies MSI/Plessey second fixed length.
This applies when MSI/Plessey Length Control is set to fixed-length
decoding.
If Fixed Length 2 is set to 00 (zero), then Fixed Length 1 will apply.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET MSI/PLESSEY FIXED LENGTH 2
below. You'll need to cover any unused bar codes on this and the
facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C that
represent the desired fixed label length. The selectable range for
this option is 0 (zero), or 4 to 16. Pad all single digit numbers
with a leading zero to yield a two-digit entry (00, 04-16).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET MSI/PLESSEY FIXED LENGTH 2
6-257