Test Mode - Datalogic MAGELLAN 8200 Product Reference Manual

Test Mode

DO NOT scan the SWITCH bar code before and after scanning the bar codes
on this page.
Scanning the TEST MODE = DISABLE bar code sets the Double Read
Timeout to 600ms.
NOTE
6-10
Use this feature to place the scanner into a testing, or "demo" mode. This
special mode disables the scanner interface, meaning that bar code data is
not sent out to the host via the scanner interface. This allows the bar code
to be scanned continuously without requiring a response from the POS
terminal.
To return the scanner to normal function, scan the TEST MODE = DIS-
ABLE bar code below.
®
Magellan 8100/8100
TEST MODE = DISABLE
TEST MODE = ENABLE
Ω
and 8200
/ Ω
8200 Scanner