I 2 Of 5 Check Character Transmission - Datalogic MAGELLAN 8200 Product Reference Manual

I 2 of 5 Check Character Transmission

This feature applies only when I 2 of 5 Check Character Calculation
is enabled. This item is ignored when the advanced feature, Full Label Edit,
is enabled.
NOTE
6-214
Enables/disables transmission of an optional Interleaved 2 of 5 check char-
acter.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
I 2 of 5 CHECK CHARACTER TRANSMISSION = DISABLE
I 2 of 5 CHECK CHARACTER TRANSMISSION = ENABLE
®
Magellan 8100/8100
Ω /
and 8200 8200
Ω
Scanner