Interface Related Features; Interface Type - Datalogic MAGELLAN 8200 Product Reference Manual

Interface Related Features

Interface Type

NOTE
NOTE
6-48
The 8100 scanner family supports only a single interface type defined at
the factory. 8100 scanners that support either IBM USB or IBM Port 17
cannot have their interface type changed, and will reject programmining
bar codes that attempt to change it. 8100 scanners that support one of the
RS-232 interface types can be changed to another RS-232 type, but can-
not be changed to IBM USB or IBM Port 17.
Specifies the current scanner interface. Selections are:
INTERFACE TYPE
RS-232 Standard
RS-232 Wincor-Nixdorf
RS-232 Single Cable
IBM USB
Port 17
IBM
Null Interface
a. To access a scanner's interface identification number, place the
scanner in Scanner Diagnostic Mode and view the 7-segment FRU
display (reference Scanner Diagnostic Mode in Section 2 for more
information).
A new scanner may have been shipped from the factory with a Null Inter-
face (no interface type selected) to ensure system compatibility at instal-
lation. In this case, the correct Interface Type programming bar code must
be scanned first before the scanner can be used with a POS system.
®
Magellan
INTERFACE IDENTIFICATION NUMBER
NOT USER-SELECTABLE
Indicated by 7-segment FRU display flashing
0 at start-up
Ω
8100/8100 and 8200
a
05
12
20
45
04
/ Ω
8200 Scanner