I 2 Of 5 Fixed Length 1 - Datalogic MAGELLAN 8200 Product Reference Manual

I 2 of 5 Fixed Length 1

NOTE
6-220
This feature specifies I 2 of 5 first fixed length.
This applies when I 2 of 5 Length Control is set to fixed-length
decoding.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code, SET I 2 OF 5 FIXED LENGTH 1 below.
You'll need to cover any unused bar codes on this and the facing
page to ensure that the scanner reads only the bar code you intend
to scan.
3. Scan the appropriate digits from the keypad in Appendix C that
represent the desired fixed label length. The selectable range for
this option is 02 to 50, even numbers only. Pad all single digit
numbers with a leading zero to yield a two-digit entry (02-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
®
Magellan
SET I 2 OF 5 FIXED LENGTH 1
Ω
8100/8100 and 8200
/ Ω
8200 Scanner