Msi/Plessey Aim Id - Datalogic MAGELLAN 8200 Product Reference Manual

MSI/Plessey AIM ID

Product Reference Guide
This feature enables/disables transmission of the MSI/Plessey AIM sym-
bology identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
MSI/PLESSEY AIM ID = DISABLE
MSI/PLESSEY AIM ID = ENABLE
6-251