Code 39 Length Control - Datalogic MAGELLAN 8200 Product Reference Manual

Table of Contents

Code 39 Length Control

This feature specifies whether variable-length or fixed-length decoding

will be set for Code 39.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to cover

any unused bar codes on this and the facing page to ensure that

the scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

If variable-length control was selected, you must now set the features

Code 39 Maximum Label Length and Code 39 Minimum Label

Length. If fixed-length control was selected, you must now set Code

39 Fixed Length 1 and Code 39 Fixed Length 2.

When using variable length stitching, it is important to enable Code 39

Check Character Calculation to prevent misreads.

CODE 39 LENGTH CONTROL = VARIABLE-LENGTH

CODE 39 LENGTH CONTROL = FIXED-LENGTH

Show Quick Links

Table of Contents