Datalogic MAGELLAN 8200 Product Reference Manual page 89

Figure 4-7. Problem Isolation: Remote Display
REMOTE DISPLAY
START
Is the
unit configured
for a Remote
Display
?
YES
Verify that the Remote
Display cable is securely
attached to the external
Remote Display port and
reset the scanner.
Is the
problem
fixed
?
YES
DONE
Product Reference Guide
Scanner-scale models that include
a Remote Display when shipped
from the factory, are configured
for use with the display. If you're
unsure of the settings for your
unit, contact Tech Support.
Use the programming bar
NO
codes in Section 6 to
enable operation using a
Remote Display.
Is the
NO
problem
fixed
?
Re-connect using a
NO
known-good Remote
Display. Reset the
scanner and retest.
YES
DONE
Is the
problem
fixed
?
NO
Call Tech Support
YES
Replace the
Remote Display
4-13