Code 39 Enable - Datalogic MAGELLAN 8200 Product Reference Manual

Code 39 Enable

Product Reference Guide
Enables/disables the ability of the scanner to decode Code 39 labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 39 = DISABLE
CODE 39 = ENABLE
6-181