Ack Nak Retry Count - Datalogic MAGELLAN 8200 Product Reference Manual

Table of Contents

RS-232 ACK NAK Retry Count

A setting of 255 specifies "retry forever."

This feature sets the number of times for the scanner to retry a label trans-

mission under a retry condition.

To set the RS-232 ACK NAK Retry Count:

1. Scan the SWITCH bar code.

2. Scan the bar code, SET RS-232 ACK NAK RETRY COUNT

below. You'll need to cover any unused bar codes on this and the

facing page to ensure that the scanner reads only the bar code you

intend to scan.

3. Scan the appropriate digits from the keypad in Appendix C that

represent the desired number. The selectable range is 0-255 resets.

Pad all single and double digit numbers with leading zeroes to

yield a three-digit entry (000-255).

4. The scanner will automatically exit Programming Mode when the

appropriate amount of digits have been scanned.

SET RS-232 ACK NAK RETRY COUNT

Show Quick Links

Table of Contents