Datalogic MAGELLAN 8200 Product Reference Manual page 96

You have completed the scale calibration procedure. You must now con-
tinue with the calibration verification tests to complete the scale's calibra-
tion. If you are weighing in pounds, continue with the following
procedures to verify that the scale was successfully calibrated and that it
weighs properly. If you are weighing in kilograms, turn to the instructions
titled, Calibration Verification (Kilograms), later in this section.
® Ω / Ω
5-6 Magellan 8100/8100 and 8200 8200 Scanner