Enable Ean Two Label - Datalogic MAGELLAN 8200 Product Reference Manual

Enable EAN Two Label

Contact Customer Support for details about advanced programming for this
feature.
6-154
Enables/disables the ability of the scanner to decode EAN two-label pairs.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
®
Magellan 8100/8100
EAN TWO LABEL = DISABLE
EAN TWO LABEL = ENABLE
Ω
and 8200
/ Ω
8200 Scanner