Code 93 Enable - Datalogic MAGELLAN 8200 Product Reference Manual

Code 93 Enable

6-238
Enables/disables the ability of the scanner to decode Code 93 labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
®
Magellan 8100/8100
CODE 93 = DISABLE
CODE 93 = ENABLE
Ω
and 8200
/ Ω
8200 Scanner