Datalogic MAGELLAN 8200 Product Reference Manual page 80

Table 4-1. Error Codes and Corrective Action
Error
Probable Cause
Code
0
Configuration
Blinking
1 Configuration Error
2 Digital Board
3 Motor
4 Laser
5
Laser
6 Digital Board
7 Scale
8 Remote Display
A Button Module
C Scale Calibration
Decimal
3.3 V Present
Point
4-4
No POS interface has been selected (Null interface). See the topic,
Interface Type, in Section 6 to select the required interface using
programming bar codes.
See Section 6, Programming, for details about configuring the scan-
ner using programming bar codes.
Unplug unit and call technical support personnel.
Unplug unit and call technical support personnel.
Call technical support personnel.
Call technical support personnel.
Unplug unit and call technical support personnel.
See the topic Scale Error Reporting in this section for problem
identification and corrective actions.
Connect the Remote Display. If necessary, replace display or cable.
Alternatively, you can disable the Remote Display using the program-
ming procedures described in Section 6.
Call technical support personnel
Proceed to Section 5, Calibration
If not lit, call technical support personnel
®
Magellan 8100/8100
Corrective Action
Ω /
and 8200 8200
Ω
Scanner