Upc-E Number System Character Transmission - Datalogic MAGELLAN 8200 Product Reference Manual

UPC-E Number System Character Transmission

This item is ignored when the advanced feature, Full Label Edit, is enabled.
NOTE
Product Reference Guide
Enables/disables transmission of a UPC-E number system character.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
UPC-E NUMBER SYSTEM CHARACTER TRANSMISSION = DISABLE
UPC-E NUMBER SYSTEM CHARACTER TRANSMISSION = ENABLE
6-121