Service Access - Datalogic MAGELLAN 8200 Product Reference Manual

Table of Contents

Figure 2-3. Debris Chutes & Ventilation Slots

Service Access

If motors, conveyor belts, or other heat producing equipment are located

near the scanner, forced air ventilation may be required. In most installa-

tions, a 30 cfm (.84 cmm) axial fan should provide sufficient air move-

ment. If a ventilation fan is installed, one with a removable filter that may

be washed or replaced is recommended.

Debris Chutes/Ventilation Slots

The scanner and scanning-scale have been engineered to allow perfor-

mance of all routine service and maintenance (such as "zeroing" and cali-

bration) without removing the scanner from the checkstand. Additionally

all cable connections made at the scanner can be connected and removed

while the unit is sitting on the countertop. The installer should provide

service access to all remaining cable connectors as well as the AC/DC

Power Supply (if installed).

Show Quick Links

Table of Contents