Codabar Aim Id - Datalogic MAGELLAN 8200 Product Reference Manual

Codabar AIM ID

6-230
This feature enables/disables transmission of the Codabar AIM symbology
identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that
the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
®
Magellan 8100/8100
CODABAR AIM ID = DISABLE
CODABAR AIM ID = ENABLE
Ω
and 8200
/ Ω
8200 Scanner