Single Cable Rs-232 Use Bcc - Datalogic MAGELLAN 8200 Product Reference Manual

Single Cable RS-232 Use BCC

6-104
Enables/disables the ability of the scanner to use BCC.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SINGLE CABLE RS-232 USE BCC = DISABLE
SINGLE CABLE RS-232 USE BCC = ENABLE
®
Magellan 8100/8100
Ω /
and 8200 8200
Ω
Scanner