Standard 2 Of 5 Stitching - Datalogic MAGELLAN 8200 Product Reference Manual

Standard 2 of 5 Stitching

NOTE
Product Reference Guide
Enables/disables stitching for Standard 2 of 5 labels. When parts of a Stan-
dard 2 of 5 bar code are presented to the scanner with this feature enabled,
the bar code parts will be assembled by the scanner's software, and the data
will be decoded if all bar code proofing requirements are met.
This applies when Standard 2 of 5 Length Control is set to fixed-
length decoding.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
STANDARD 2 OF 5 STITCHING = DISABLE
STANDARD 2 OF 5 STITCHING = ENABLE
6-269