Code 128 Enable - Datalogic MAGELLAN 8200 Product Reference Manual

Table of Contents

Code 128 Enable

Enables/disables the ability of the scanner to decode Code 128 labels.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to

cover any unused bar codes on this and the facing page to ensure

that the scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

CODE 128 = DISABLE

CODE 128 = ENABLE

Show Quick Links

Table of Contents