Enable EAN Two Label
Contact Customer Support for details about advanced programming for this
feature.
NOTE
7-178
Enables/disables the ability of the scanner to decode EAN two-label pairs.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
EAN TWO LABEL = DISABLE
EAN TWO LABEL = ENABLE
Magellan
TM
8500Xt Scanner