Enable Ean Two Label - Datalogic Magellan 8300 Product Reference Manual

Enable EAN Two Label

Contact Customer Support for details about advanced program-
ming for this feature.
Product Reference Guide
Enables/disables the ability of the scanner to decode EAN two-label pairs.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN TWO LABEL = DISABLE
EAN TWO LABEL = ENABLE
Other UPC/EAN Options
6-223