Single Cable Rs-232 Use Bcc - Datalogic Magellan 8300 Product Reference Manual

In-counter scanner/scales

Hide thumbs Also See for Magellan 8300:

Table of Contents

Single Cable RS-232 Use BCC

Product Reference Guide

Enables/disables the ability of the scanner to use BCC.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

SINGLE CABLE RS-232 USE BCC = DISABLE

SINGLE CABLE RS-232 USE BCC = ENABLE

Single Cable RS-232 Options

Show Quick Links

Table of Contents

Magellan 8400