Single Cable Rs-232 Use Bcc - Datalogic Magellan 2200VS Reference Manual

Single Cable RS-232 Use BCC

158
Enables/disables the ability of the scanner to use BCC.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SINGLE CABLE RS-232 USE BCC = DISABLE
SINGLE CABLE RS-232 USE BCC = ENABLE
®
Magellan 2200VS/2200VS and 2300HS/2300HS