Enable The Copy Control Device - Oce VarioPrint 2045-65 DC Configuration And Maintenance Manual

Enable the copy control device

Introduction
The copy control device is externally connected to the machine. The system
gives access to external users who are not authorized in the accounts database.
The external user must insert coins or a credit card to gain access to the
machine.
Océ Service must install and configure the copy control device.
You can enable or disable an installed and configured copy control device.
An enabled copy control device and an access-secured system can be
combined to enable use by internal and external user groups (see 'About the
access-secured system' on page 32).
[14] Entry screen for external users
[14] Entry screen for external users
[15] Entry screen for external and internal users
[15] Entry screen for external and internal users
The following table displays the requirements for external users if the copy
control device is enabled:
34 Océ VarioPrint 2045-65 DC Configuration and maintenance manual