Restart The Dac - Oce 31x5e Maintenance Manual

Restart the DAC

Introduction
To solve some errors, you are requested to restart the DAC. If an error occurs,
the Océ 31x5E reports that a restart of the DAC is necessary.
Before you begin
Enter the key operator system.
1.
Attention:
button on the DAC. The restart must be performed using the key operator
system.
You can also use the Océ System Configuration to stop or restart the
Note:
DAC.
Illustration
[78] Restart the DAC
[78] Restart the DAC
Restarting the DAC
Activate the 'Print settings' section.
1.
Open the 'DAC control' card.
2.
Press the 'DAC' function key to select 'Restart' .
3.
Check
Quit the key operator system.
1.
To check, make sure that the problems have been solved.
2.
128 Océ 31x5E Configuration and Maintenance Manual
When restarting the DAC do not use the ON / OFF or the Reset