Access Point: Wireless Profile (Ssid) - TRENDnet TEW-826DAP User Manual

TRENDnet User's Guide

Access Point: Wireless Profile (SSID)

Wireless (2.4GHz, 5GHz1, or 5GHz2) > Wireless Network
1. Log into your management page (see
8).
2. Click on the wireless band you would like to configure and click Wireless
Network.
3. Underneath the basic wireless band section, you will see Wireless Network and
all your wireless network profiles will be listed.
4. Click on the Edit button next to the wireless profile you want to configure.
5. Review the wireless settings, click Save and Apply/Discard Changes when
finished.

SSID: Enter the wireless network name (SSID) to assign to the selected wireless
profile

Hide SSID: Select option to disable the wireless network name to broadcast

Separate Stations: Select this option to restrict wireless client devices from
accessing other client devices connected to this network(s).

Enable: Select this option to enable this SSID
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access the management page" on page
6. Click on the Save button then click on the flashing Apply/Discard button
located on the top left section, and click Save & Apply to apply the settings.
Note: Your configurations are not saved and applied until you click on Apply/Discard
Changes button. The Save & Apply step saves and applies all configuration changes.
TEW-826DAP
34