TRENDnet User's Guide
AP Name: Displays the name assigned to the access point
Signal: Displays the signal strength of the access point
Uptime: Displays the time duration of when the access point has been running
Tx: Display the transmit data rate of the access point
Rx: Displays the receive data rate of the access point
DHCP Client
This table shows the assigned IP address, MAC address and time expired for each DHCP
leased client.
1. Log into the management page (see
2. Click on Status section and DHCP Client.
#: The number of access point
IP Address: Displays the IP Address of the access point
MAC Address: Displays the MAC address of the access point
Host Name: Host name of the access point
Time Expiration: Displays the DHCP expiration time of the access point
SSID: Displays the SSID of the access point
AP Name: Displays the name assigned to the access point
Signal: Displays the signal strength of the access point
Uptime: Displays the time duration of when the access point has been running
Tx: Display the transmit data rate of the access point
Rx: Displays the receive data rate of the access point
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management
page" on page 9).
Configure Wireless Profile
This section outlines available management options under the Profile Settings of the
Wireless button. This access point supports multiple SSID, you can set an additional of
16 SSSID for your wireless network.
Select Always Enabled option and click the Profile Name you would like to
configure.
The following section outlines options to configure the basic settings of the multiple
SSID.
Profile Name: Enter the profile name of the network name you are configuring.
Wireless Network Name (SSID): This acronym stands for Service Set Identifier
and is the name of your wireless network. It differentiates your wireless network
from others around you.
Broadcast Network Name (SSID):
TEW-734APO
44