TRENDnet User's Guide
Initial Setup
Configure the Computer
Below are procedures on how to configure your computer according to the operating
system you are using:
Windows 7/8/8.1
1
Click Start > Control Panel > Network and Sharing Center > Change Adapter Settings.
2
Right-click the Local Area Connection icon.
3
Click Properties. Then click Internet Protocol Version 4 (TCP/IPv4).
4
Select Use the following IP address.
5
Enter the required IP address and Subnet mask.
6
Click OK.
Windows Vista
1
Click Start > Control Panel > Network and Internet > Manage Network Connections.
2
Right-click the Local Area Connection icon, and then click Properties.
3
Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
4
Select Use the following IP address.
5
Enter the required IP address and Subnet mask.
6
Click OK.
Windows XP/2000
1
Click Start > Control Panel. Then double-click the Network Connections icon.
2
Right-click the Local Area Connection icon, and then click Properties.
3
Click Internet Protocol (TCP/IP), and then click Properties.
4
Select Use the following IP address.
5
Enter the required IP address and Subnet mask.
6
Click OK.
© Copyright 2015 TRENDnet. All Rights Reserved.
Log in to Management Page
Default Settings
Before accessing the web-based management page, configure the IP address and subnet
mask of your computer to the following:
Management IP:
192.168.10.x
Subnet mask:
255.255.255.0
Administrator name:
admin
Administrator password:
admin
Default SSID:
(printed on pre-set label)
Default SSID passphrase:
(printed on pre-set label)
Access the Management Page
1
Open your web browser and do one of the following:
• enter the URL/domain name http://tew-821dap, or
• enter the IP address http://192.168.10.100.
2
Enter the default user name and password, select your preferred language, and then
click Login.
The main screen appears.
TEW-821DAP
10