FCoE protocols supported
The Brocade FCoE converged network adapter supports two layers of protocols: Ethernet link layer
and FCoE layer. They are listed in the following sections.
Ethernet link layer protocols supported
The following protocols support the Ethernet link layer.
•
•
•
•
•
•
•
•
•
•
•
•
•
FCoE protocols
The following protocols support Fibre Channel over Ethernet.
•
•
•
•
•
DCFM Professional Plus User Manual
53-1001774-01
802.1q (VLAN)
802.1Qaz (enhanced transmission selection)
802.1Qbb (priority flow control)
802.3ad (link aggregation)
802.3ae (10 Gb Ethernet)
802.1p (priority encoding)
IEEE 1149.1 (JTAG) for manufacturing debug and diagnostics
IPv4 specification (RFC 793/768)
IPv6 specification (RFC 2460)
TCP/UDP specification (RFC 793/768)
ARP specification (RFC 826)
RSS with support for IPV4TCP, IPV4, IPV6TCP, IPV6 hash types
HDS (Header-data split)
FIP (FC-BB5 compliant):
•
Support for FIP Discovery protocol for dynamic FCF discovery and FCoE link management
•
Support for FPMA and SPMA type FIP fabric login
Support for Initiator mode only (FCP-3 compliant in Initiator mode)
SCSI protection information support
IP-over-FC
NPIV support
15
351