Ip Configuration - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

3

IP Configuration

You can configure IP Configuration settings.
Configuring IP Configuration settings
NOTE
The server binds using IPv6 address by default if your Operating System is IPv6-enabled (dual mode
or IPv6 only). The server binds using IPv4 address by default if your Operating System is
IPv4-enabled. Servers running in dual mode allow the client to communicate from both IPv6 and
IPv4 addresses.
To configure the IP address used by the server for client-server communications, complete the
following steps.
1. Select Server > Options.
The Options dialog box displays (Figure 41).
FIGURE 41
Options dialog box (IP Configuration option)
2. Select IP Configuration in the Category list to set the IP address.
92 DCFM Professional Plus User Manual
53-1001774-01