Assigning A Cee Map To A Port Or Link Aggregation Group - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

15

Assigning a CEE map to a port or link aggregation group

A port can have either a CEE map or a Traffic Class map assigned to it, but it cannot have both.
1. Select Configure > Switch > CEE from the menu bar.
2. Select a port or LAG, and click Edit.
3. Click the QoS tab on the Edit Port dialog box.
FIGURE 116
4. Click the Assign a map to <port name> check box.
5. Select CEE Map in the Map Type list.
6. Select a CEE Map in the Available CEE Maps list.
7.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
378
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The QoS dialog box displays.
QoS, Assign a CEE Map to a port dialog box
If you do not enable this check box, all QoS edit features are disabled.
If no CEE maps were created on the switch, the Available CEE Maps list is empty.
Click OK to commit the map assignment.
The CEE Confirmation and Status dialog box displays.
DCFM Professional Plus User Manual
53-1001774-01