Changing The Product Label; Changing The Port Label; Changing The Port Display - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Changing the product label

1. Select a product in the Connectivity Map or Product List.
2. Select View > Product Label, then select one of the following options:

Changing the port label

1. Select a port in the Connectivity Map or Product List.
2. Select View > Port Label, then select one of the following options:

Changing the port display

You have the option of viewing connected (or occupied) product ports, unoccupied product ports, or
attached ports.
NOTE
Occupied/connected ports are those that originate from a device, such as a switch. Attached ports
are ports of the target devices that are connected to the originating device.
Select View > Port Display, then select one or more of the following options:
•
•
•
•
DCFM Professional Plus User Manual
53-1001774-01
•
Name (Product). Displays the product name as the product label.
•
WWN. Displays the world wide name as the product label.
•
IP Address. Displays the IP Address as the product label.
•
Domain ID. Displays the domain ID as the product label.
Changes apply to all fabrics present in the topology when the Product Label option is selected.
•
Name. Displays the name as the port label.
•
Port Number. Displays the port number as the port label.
•
Port Address. Displays the port address as the port label.
•
Port WWN. Displays the port world wide name as the port label.
•
User Port #. Displays the user's port number as the port label.
•
Slot/Port. Displays the slot and port as the port label.
All port labels within the fabric to which the selected item belongs change to the selected port
label type.
Occupied Product Ports. Displays the ports of the devices in the fabrics (present in the
connectivity map) that are connected to other devices.
Unoccupied Product Ports. Displays the ports of the devices (shown in the connectivity map)
that are not connected to any other device.
Attached Ports. Displays the attached ports of the target devices.
Switch to Switch Connections. Displays the connections between devices. Switch to switch
connections only display when the Attached Ports option is also selected.
All port labels on all fabrics change to the selected port label type.
5
131