Changing connection utilization
You can change the utilization percentages.
To change the utilization percentages, complete the following steps.
1. Click the change link in the utilization legend.
2. Enter or select the end percentage you want for the blue line.
3. Enter or select the end percentage you want for the yellow line.
4. Click the apply link.
DCFM Professional Plus User Manual
53-1001774-01
When you make a change to the end percentage of a utilization line, you also change the start
percentage for the utilization line immediately above the one you changed when you click
apply. For example, if you change the blue line end percentage to 60 the yellow line start
percentage changes to 60 when you click apply.
The new values appear in the utilization legend.
11
315