2. Click Add Fabric to specify the IP addresses of the devices you want to discover.
3. Enter a name for the fabric in the Fabric Name field.
4. Enter an IP address for a device in the IP Address field.
DCFM Professional Plus User Manual
53-1001774-01
FIGURE 18
Discover Setup dialog box
The Address Properties dialog box displays.
FIGURE 19
Address Properties dialog box (IP Address tab)
For seed switch requirements, refer to
NOTE
The Backbone Chassis cannot be used as a seed switch.
NOTE
Professional and Professional Plus editions cannot manage the Backbone Chassis.
Professional edition cannot manage pure M-EOS fabrics.
NOTE
Professional Plus edition can discover up to 4 fabrics.
"Seed switch requirements"
2
on page 54.
37