Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 123

Configuring an internal FTP server
To configure the internal FTP server settings, complete the following steps.
1. Select Server > Options.
FIGURE 40
2. Select FTP/SCP in the Category list.
3. Select the Use built-in FTP Server option to use the default built-in FTP server.
4. Change your password by entering a new password in the Password and Confirm Password
5. Click Test to test the FTP server.
6. Click Apply or OK to save your work.
DCFM Professional Plus User Manual
53-1001774-01
The Options dialog box displays
Options dialog box (FTP/SCP option)
All active fields are mandatory.
fields.
An "FTP Server running successfully" or an error message displays.
If you receive an error message, make sure your credentials are correct, the server is running,
the remote directory path exists, and you have the correct access permission; then try again.
(Figure 40).
3
89