Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 224

8
•
•
•
•
•
•
•
•
•
Depending on the device type, some of the properties listed in the following table may not be
available for all products.
TABLE 11
Field/Component
Addressing Mode
Back to Edge Routing Support
Bandwidth
Capability
Compression
Connected Virtual FCoE Port
Contact
Contributors
Device Type
Description
Destination IP Address
Discovery Status
Domain ID
Fabric
Fabric Name
Fabric Watch
Fastwrite
FC Port
FCoE Capable
FCS Role
Firmware
GigE Port
Host Name
190
FC Ports
GigE Ports
IP Ports
iSCSI Ports
POM
Remote Ports
SFP
Virtual Sessions Ports
Virtual FCoE Ports
Device properties
Description
The addressing mode of the switch.
Whether back to edge routing is supported.
The bandwidth of the FCIP tunnel.
The node capability.
Whether compression is On or Off for the FCIP tunnel.
The fabric name, switch name, and virtual FCoE port number of the
connected virtual FCoE port.
The primary contact at the customer site.
The device contributors.
Whether the device is an initiator or target.
A description of the customer site.
The IP address of the of the FCIP tunnel destination device.
The discovery status of the switch. Examples include 'Discovered: Seed
Switch' and 'Discovered: Not Reachable'.
The device's domain ID, which is the top-level addressing hierarchy of
the domain.
The fabric name.
The name specified through the device Element Manager.
Whether Fabric Watch is up or down.
Whether fastwrite is On or Off for the FCIP tunnel.
The FC port of the FCIP tunnel.
Whether the device is Fibre Channel over Ethernet capable.
Whether FCS is supported.
The firmware version.
The GigE port of the FCIP tunnel.
The Host name.
DCFM Professional Plus User Manual
53-1001774-01