Enabling Or Disabling The Default Zone For Fabrics - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

7.
8. Click OK to save your changes and close the Add Zone Member dialog box.
9. For offline zone databases only, complete the following steps to save the zone configuration
10. Click OK or Apply to save your changes.

Enabling or disabling the default zone for fabrics

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
DCFM Professional Plus User Manual
53-1001774-01
Add the new member by alias name by completing the following steps.
a. Select the Existing Alias option.
b. Select an alias from the list.
OR
Create a new alias by completing the following steps.
a. Select the New Alias option.
b. Enter a name in the New Alias field.
c. Assign the alias by choosing one of the following options:
•
Select the WWN option and enter the WWN in the field.
If you enter a WWN that has been used by a discovered device, a message displays
informing you of this and instructing you to enter a port WWN. Click OK to close the
message box and enter an appropriate WWN.
•
Select the Domain, Port Index (decimal) option and enter domain or port values in the
fields.
•
Select the Domain, Port Index (hex) option and enter domain or port values in the
fields.
OR
Click Apply to save your changes and keep the Add Zone Member dialog box open so you can
add more new members. Repeat steps 5, 6, and 7 as many times as needed, and proceed to
step 8 when appropriate.
into the switch from the offline zone database:
a. Select Save to Switch from the Zone DB Operation list.
b. Click Yes on the confirmation message.
The selected zone database is saved to the fabric without enabling a specific zone
configuration.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
20
577