Discovery; In This Chapter; Fabric Discovery Overview - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Supporting dcfm 10.4.x
Hide thumbs Also See for Brocade BladeSystem 4/24:
Table of Contents

Advertisement

Discovery

In this chapter

Fabric discovery overview

Discovery is the process by which the Management application contacts the devices in your SAN.
When you configure discovery, the application discovers products connected to the SAN. The
application illustrates each product and its connections on the Connectivity Map (topology).
When you discover a fabric, the Management application checks to confirm that the seed switch is
running a supported Fabric OS or M-EOS version in the fabric, and if it is not, the Management
application prompts you to select a new seed switch.
NOTE
Discovery of a Secure Fabric OS fabric in strict mode is not supported.
For a Fabric OS fabric, the seed switch must be the primary Fabric Configuration Server (FCS). If
you use a non-primary FCS to discover the fabric, the Management application displays an error
and will not allow the discovery to proceed. If the Management application has already discovered
the fabric, but afterward you create the FCS policy and the seed switch is not a primary FCS, an
event is generated during the next poll.
The Management application cannot discover a fabric that is in the process of actively configuring
to form a fabric. Wait until the fabric is formed and stable, then re-attempt the fabric discovery.
After fabric discovery successfully completes, all clients are updated to display the newly
discovered fabric.
During fabric discovery, if you have defined IPv6 IP addresses for the switch, the Management
application remembers the IP address only. If the switch has a DNS name that you have defined,
the Management application can remember the DNS name and use that.
NOTE
Professional Plus edition can discover up to 4 fabrics.
DCFM Professional Plus User Manual
53-1001774-01
Fabric discovery overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Host discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Viewing the discovery state. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Fabric monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Seed switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Chapter
2
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcfm professional plus

Table of Contents