Filtering Real-Time Performance Data - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Filtering real-time performance data

To filter real-time performance data from the Real Time Performance Graphs dialog box, complete
the following steps.
1. Open the Real Time Performance Graphs dialog box.
2. Click Select to change the object type.
3. Select the object type (FC Ports, ISL Ports, Device Ports, EE Monitors, GE Ports, FCIP Tunnels,
4. Right-click anywhere in the Available table and select Expand All.
5. Select the ports you want to include in the performance graph in the Available table.
6. Click the right arrow to move the selected ports to the Selected table.
7.
8. Select the measure by which you want to gather performance data from the Measures list.
9. (Optional) Enter a value (percentage) in the Reference Line field to set a reference for the
DCFM Professional Plus User Manual
53-1001774-01
For step-by-step instructions, refer to
page 294. The Real Time Performance Graphs dialog box displays.
FIGURE 96
Real Time Performance Graphs dialog box
Managed HBA Ports, Managed CNA Ports, or 10GE Ports) by which you want to graph
performance from the Show list.
Press Ctrl or Shift and then click to select more than one port.
Click OK.
The Real Time Performance Graphs dialog box displays.
To select more than one measure, click the Additional Measures expand arrows and select the
check box for each additional measure.
transmit and receive utilization.
Note that this field is only available when you select Tx % Utilization or Rx % Utilization from the
Measures list.
"Generating a real-time performance graph"
11
on
295