Deleting A Cee Map - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Deleting a CEE map

You cannot delete the CEE map of a 10 Gbps CEE/FC switch module.
1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select a CEE Map that you want to delete from the CEE Maps table.
5. Click Delete.
6. Click Yes to confirm.
7.
8. Review the changes carefully before you accept them.
9. Click Start to apply the changes, or click Close to abort the operation.
DCFM Professional Plus User Manual
53-1001774-01
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The QoS dialog box displays.
The Delete confirmation dialog displays.
The CEE Map row is removed from the table.
Click OK.
The CEE Confirmation and Status dialog box displays.
If a CEE map is assigned to a port or LAG and you delete the CEE map, an error message
displays in the Status area (applicable for the Traffic class map and ACL).
15
377