Adding Members To A Zone - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

6. Click OK to close the Zone Properties dialog box.

Adding members to a zone

Use this procedure to add a member to a zone when the member is listed in the Potential Members
list of the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select one or more zones to which you want to add members in the Zones list. (Press SHIFT or
5. Select an option from the Type list.
6. Select one or more members to add to the zone in the Potential Members list. (Press SHIFT or
7.
DCFM Professional Plus User Manual
53-1001774-01
Depending on what type of zone you selected, the following information is included in the zone
properties:
•
Zone Name—The name of the zone.
•
Zone Configs Containing This Zone—The number of zone configurations to which this zone
belongs.
•
Total Zone Members—The number of zone members in the selected zone.
•
Number of Aliases—The number of aliases in this zone.
•
Zone Members Contained by Aliases—The number of zone members in the selected alias.
•
Configure Status (TI Zone and Fabric OS only)—Whether or not the TI zone is enabled.
•
Configure Failover (TI Zone and Fabric OS only)—Whether or not the TI zone failover is
enabled.
•
Status (not applicable for TI zones)—The status of the selected zone.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
If you want to show all the discovered fabrics in your fabric group in the Potential Members list,
right-click in the Potential Members list and select Display All.
CTRL and click each zone name to select more than one zone.)
By default, the first time you launch the Zoning dialog box for a Zoning Scope, the Potential
Members list displays valid members using the following rules:
•
If you select the World Wide Name type, the valid members display by the Attached Ports.
•
If you select the Domain/Port Index type, the valid members display by the ALL Product
Ports (both occupied and unoccupied). This option is available for FC fabrics only.
•
If you select the Alias type, the valid members display by the device Alias.
CTRL and click each member to select more than one member. To add all ports on a device,
select the device.)
Click the right arrow between the Potential Members list and Zones list to add the selected
members to the zone.
20
573