Adding A User Account - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

13

Adding a user account

NOTE
You must have the User Management privilege to perform this task.
To add a user, complete the following steps.
1. Select Server > Users.
2. Click Add.
FIGURE 99
3. Type the description of the user in the Description field.
4. Type a unique user name (127-character limit) for the user in the User ID field.
5. Type the user's password (127-character limit) in the Secure Password and Retype Password
6. Select the Enable option to enable e-mail notification for the user.
7.
8. Click the Filter link to specify the event types for which to send e-mail notification to this user.
9. Click OK to save your changes and close the Add User dialog box.
10. Click OK on the message.
11. Click OK to close the Server Users dialog box.
324
The Server Users dialog box displays.
The New User dialog box displays
New User dialog box
fields.
NOTE
You must have E-mail Event Notification Setup privileges to enable e-mail notification.
A message may display stating that you have enabled event notification for this user but event
notification for the SAN is turned off, do you want to enable event notification for the SAN. Click
Yes.
Type the user's e-mail addresses in the E-mail Address field, separating multiple addresses
with a semicolon (;).
For detailed instructions, refer to
The new user displays on the Server Users dialog box.
(Figure 99).
"Filtering event notifications for a user" on page 325.
DCFM Professional Plus User Manual
53-1001774-01