Deleting An Acl; Assigning An Acl To A Port Or Link Aggregation Group - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Deleting an ACL

When you delete an ACL from the ACLs table, you are given the option to also remove the profile
from the entities where it is currently associated.
1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch, and click Edit.
3. Click the Access Control List tab on the Edit Switch dialog box.
4. Select the ACL that you want to delete from the ACLs table.
5. Click Delete.
6. Click OK to commit the ACL parameter changes.
7.
8. Click Start to apply the changes, or click Close to abort the operation.

Assigning an ACL to a port or link aggregation group

An access control list (ACL) cannot be assigned to a port when the port is a member of a link
aggregation group (LAG). An ACL can be assigned to a LAG, however.
NOTE
The ports and the ports in a link aggregation group (LAG) for the selected switch must be in Layer 2
(L2) mode. If the ports or ports in a LAG are not in L2 mode, a yellow banner displays.
1. Select Configure > Switch > CEE from the menu bar.
2. Select a port or LAG, and click Edit.
3. Click the Access Control List tab on the Edit Port/Edit LAG dialog box.
4. Click the Assign Access Control List to <port name> checkbox.
DCFM Professional Plus User Manual
53-1001774-01
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The Access Control List dialog box displays.
The selected ACL is removed from the ACLs table.
The CEE Confirmation and Status dialog box displays.
Review the changes carefully before you accept them.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The Access Control List dialog box displays.
You can unassign an ACL by deselecting the Assign an ACL to <port_name> checkbox.
15
391