Switch Administration And Fc0E; Fc0E Configuration Tasks; Figure 66 Switch Administration Cee Subtabs - Brocade Communications Systems 8 Administrator's Manual

•
•

Switch administration and FC0E

The CEE tab on the Switch Administration panel is specific to DCE and CEE configuration and
management. The CEE tab has five subtabs
administration:
•
•
•
•
•
.

FC0E configuration tasks

There are several tasks related to FC0E configuration. The following list describes the high level
tasks in a suggested order:
•
•
•
•
•
•
Web Tools Administrator's Guide
53-1001772-01
DRAFT: BROCADE CONFIDENTIAL
FCoE Priority Bits—Each bit represents a user priority that is associated with FCoE traffic.
Default CoS—The default Class of Service.
Link Aggregation
VLAN
FCoE Login Group
QoS
LLDP-DCBX
FIGURE 66
Switch Administration CEE subtabs
Quality of Service (QoS) configuration (optional)—If you intend to implement a specific QoS
scheme to prioritize data traffic, it is recommended that you finish your QoS configuration
before you begin port configuration. QoS values are referenced when you configure ports.
LLDP-DCBX configuration (optional)—If you intend to implement DCBX, it is recommended that
you finish LLDP-DCBX configuration before you configure ports. LLDP-DCBX values are
referenced when you configure ports.
CEE interface configuration (mandatory).
Link Aggregation Group (LAG) configuration (mandatory)—Ports must be configured before they
can be placed into a LAG. The parameters applied to the LAG reflects on each port that is
member of the LAG.
VLAN configuration (optional)—Port and LAG names are referenced in VLAN configuration, and
must be defined before you can successfully complete a VLAN configuration.
Login group configuration (optional)—Login group configuration is not dependent on any of the
above configurations. It can be done as a separate task.
Switch administration and FC0E
(Figure 66) that are used for FCoE switch
19
257