Reverting To A Default Snmp Community String - HP Brocade BladeSystem 4/12 User Manual

2
Fabric discovery overview
FIGURE 21
11. Enter a user name in the User Name field.
12. Enter a context name In the Context Name field.
13. Select the authorization protocol in the Auth Protocol field.
14. Enter the authorization password in the Auth Password field.
15. Select the privacy protocol in the Priv Protocol field.
16. Enter the privacy password in the Priv Password field.
17. Click OK on the Address Properties dialog box.
18. Click OK on the Discover Setup dialog box.

Reverting to a default SNMP community string

1. Select Discover > Setup.
2. Select an IP address from the Available Addresses table.
3. Click Edit.
4. Click the SNMP tab.
5. Click Default 'public' and Default 'private.'
6. Click OK on the Address Properties dialog box.
7.
42
Address Properties dialog box (SNMP Tab - v3)
•
If you selected Configure for 256-Port_Director_Name, go to step 17.
•
If you did not select Configure for 256-Port_Director_Name, continue with step 15.
If the seed switch is not partitioned, continue with
If the seed switch is partitioned, the Undiscovered Seed Switches dialog box displays.
a. Select the Select check box for each undiscovered seed switch to discover their fabrics.
b. Click OK on the Undiscovered Seed Switches dialog box.
The Discover Setup dialog box displays.
The Address Properties dialog box displays.
Click OK on the Discover Setup dialog box.
step 18.
DCFM Professional User Manual
53-1001773-01