Importing Hosts From A Csv File - HP Brocade BladeSystem 4/12 User Manual

2
Host discovery
3. Enter a discovery request name (such as, Manual 06/12/2009) in the Name field.
4. Select Network Address from the list.
5. Enter the IP address (IPv4 or IPv6 formats) or hostname in the Network Address field.
6. Click Add.
7.
8. Repeat
9. Click OK on the Add Host Discovery dialog box.
10. Click Close on the Discover Setup dialog box.

Importing Hosts from a CSV file

To discover Hosts by importing a CSV file, complete the following steps.
1. Select Discover > Setup.
2. Click Add Host.
3. Click Import.
44
The IP address or hostname of the Host displays in the text box.
Configure Host credentials, if necessary.
To configure host credentials, refer to
"Configuring virtual machine credentials"
step 5 through step 7
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Addresses table with pending status. To update the status
from pending you must close and reopen the Discover Setup dialog box.
The Discover Setup dialog box displays.
The Add Host Discovery dialog box displays.
FIGURE 23
Add Host Discovery dialog box - Host tab
The Open dialog box displays.
"Configuring Brocade HBA credentials"
on page 47.
for each Host you want to discover.
on page 46 or
DCFM Professional User Manual
53-1001773-01