Disabling 802.1X; Setting 802.1X Parameters For A Switch - HP Brocade BladeSystem 4/12 User Manual

Disabling 802.1x

1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch and click Edit.
3. Click the 802.1x tab on the Edit Switch dialog box.
4. Clear the Enable 802.1x check box to disable 802.1x authentication.
5. Click OK.
6. Review the changes carefully before you accept them.
7.

Setting 802.1x parameters for a switch

The 802.1x parameters can be configured whether the feature is enabled on the switch. The
default parameters are initially populated when 802.1x is enabled, but you can change the default
values as required.
1. Select Configure > Switch > CEE from the menu bar.
2. Select a switch and click Edit.
3. Click the 802.1x tab on the Edit Switch dialog box.
DCFM Professional User Manual
53-1001773-01
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The 802.1x dialog box displays.
The CEE Confirmation and Status dialog box displays.
Click Start to apply the changes, or click Close to abort the operation.
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The Enable 802.1x dialog box displays.
802.1x authentication
13
333