HP Brocade BladeSystem 4/12 User Manual page 556

C
About User Privileges
TABLE 30
Privileges and Application Behavior (Continued)
Privilege Description
Performance Allows you to configure
the performance
subsystem, the display of
performance graphs, and
threshold settings.
Product Administration An Element Manager
privilege that enables
NOTE
most functionally.
This privilege affects
M-EOS and M-EOSn
switch product Element
Managers.
Product Maintenance An Element Manager
privilege that enables
NOTE
maintenance functions.
This privilege affects
M-EOS and M-EOSn
switch product Element
Managers.
524
No Privilege Read-Only
Disables entire Enables entire
Performance submenu of Performance submenu
the Monitor menu as well off the Monitor menu as
as the right-click well as the right-click
Performance Graph(s) Performance Graph(s)
command on ports and command on ports and
switch products. switch products.
Allows you to open the
Disables the Port Optics
Performance Setup dialog
command on the
box; however, disables
right-click menu.
the OK button. No
Disables the Performance
changes can be made.
button in the CEE
Allows you to open the
Configuration dialog box.
Performance Graphs
dialog box and enables all
controls; however,
disables the check boxes
under the Set Thresholds
label on the individual
port dialog box
(double-click a graph).
Disables the functions Same as No Privilege.
described in the Element
Manager User Manual for
which you do not have
rights.
Displays the message,
"You do not have rights to
perform this action."
For Fabric OS devices, the
log in dialog box for the
switch displays.
Disables the functions Same as No Privilege.
described in the Element
Manager User Manual for
which you do not have
rights.
Displays the message,
"You do not have rights to
perform this action."
For Fabric OS devices, the
log in dialog box for the
switch displays.
Read/Write
Enables entire
Performance submenu of
the Monitor menu and the
right-click Performance
Graph(s) command on
ports and switch
products. Enables
changes to the
Performance Setup dialog
box.
Allows you to open the
Performance Graphs
dialog box and enables all
controls.
Enables all functions on
the individual port dialog
box (double-click a
graph).
Enables the Port Optics
command on the
right-click menu.
Enables the functions
described in the Element
Manager User Manual.
Enables the functions
described in the Element
Manager User Manual.
DCFM Professional User Manual
53-1001773-01